Water & Environment
Geoforce specialises in high definition, rapid characterisation of the
subsurface using state of the art geophysical equipment. Geoforce provides
geophysical solutions for environmental, hydro-geological and agricultural
applications including water table,
salinity and soil mapping. A number of our geophysical surveys can be
rapidly acquired using quad bike mounted systems which have proven to be
very versatile for environmental mapping applications.
A summary of the geophysical instruments available for environmental and
agricultural surveys are as follows (but are not limited to):
- Airborne Electromagnetic Surveying - SKYTEM is An
approach for high definition detailed cross-sectional mapping for
groundwater exploration, paleochannel mapping, salinity characterisation
and mapping of other geological features.
- EM38 - a productivity mapping tool where salinity
is present with typical depth of investigation of 0 to 50cm.
- EM31 - maps the sub soil between approximately 0 to
4m. The EM31 has been successfully used to identify areas where trees
should be planted to avert future salinity problems.
- Magnetics - Useful to map basement structures and
identification of buried metallic landfill, drums and services.
- Radiometrics - valuable tool to assist soil
mapping.
- Electrical Resistivity Imaging (ERI) - suitable for
a number of environmental application including ground water table and
salinity mapping, monitoring of leachate in 2D, hydro-geological
investigations and identification of cavities in limestone.
- Shallow Electromagnetics (TEM and FEM) - suitable
for deeper mapping of ground water table and salinity as well as
location of buried drums and storage tanks.
- Ground Penetrating Radar (GPR) - suitable for
identification of cracks/faults, services, buried tanks, landfill and
tree roots.
- Borehole Radar (BHR) - new capability introduced at
Geoforce in 2005 used for tomographic mapping between boreholes to
identify cracks/faults, cavities, buried tanks, services and geological
contacts.
- Induced Polarization (IP) - can be used to map
landfill sites. By mapping chargeability IP can distinguish clays from
salt water in the subsurface.
|